- 20
- 222 841
Billy Musgrave
Приєднався 4 гру 2009
SKUSA Pro Tour Round #1 - Orlando Main Event - Pro Shifter
Ride on board my Factory Karts / IAME 175 shifter kart for Round #1 of the SKUSA Pro Tour at Orlando Kart Center.
We started the Main Event 3rd, got by AJ on lap 1 after he made a mistake, and Danny drove away the first couple laps. From about lap 6 the tires came in and we caught back up as Danny started sliding, and spent the rest of the race trying to get by, but he was fast in all the right places.
Unfortunately that little jump at the start got me a penalty so we ended up 4th overall, but we made up for it the next day at Round #2 ;)
Huge thank you to everyone that makes this possible, including (but definitely not limited to) Baldozier Racing, PistonBones Printing, Liquid Sky Suits, Greyhound Seats, HAF Corp, Stilo Helmets, Rude Designs, IAME, and everyone who believes in American Made!
We started the Main Event 3rd, got by AJ on lap 1 after he made a mistake, and Danny drove away the first couple laps. From about lap 6 the tires came in and we caught back up as Danny started sliding, and spent the rest of the race trying to get by, but he was fast in all the right places.
Unfortunately that little jump at the start got me a penalty so we ended up 4th overall, but we made up for it the next day at Round #2 ;)
Huge thank you to everyone that makes this possible, including (but definitely not limited to) Baldozier Racing, PistonBones Printing, Liquid Sky Suits, Greyhound Seats, HAF Corp, Stilo Helmets, Rude Designs, IAME, and everyone who believes in American Made!
Переглядів: 4 016
Відео
Buttonwillow - SKUSA PKC Round 1 2023 - Pro Shifter
Переглядів 778Рік тому
Ride on board my Factory Kart at Buttonwillow Raceway for the 22 lap main event of Round 1 for the 2023 SKUSA California Pro kart Challenge. Had almost a 10 second lead and the lower rod bearing went out with 3 turns to go. Ended up pushing the kart across the line for p2. Main Event fast lap: 47.952 (lap 4)
New Castle - Pro Shifter Main Event
Переглядів 3,9 тис.Рік тому
Ride on board my Factory Kart/IAME KZ 'Screamer III' for the Pro Shifter Main Event of the 2022 SKUSA Pro Tour (Round #6) at New Castle Motorsports Park (Indiana). Started 6th in the main after a bad qualifying and only a decent heat race, unfortunately we got shuffled back in turn 1 after I tried an optimistic approach around the outside... took a few laps to clean the tires off, but once it c...
7th to 1st in 4 Laps, Pro Shifter Main Event at Willow Springs - SKUSA PKC
Переглядів 1,8 тис.2 роки тому
Ride on board my new Factory Kart chassis with IAME 175 for the Pro Shifter Main Event at Willow Springs for Round #5 of the SKUSA California Pro Kart Challenge. Not my best race, but ended up with some fun / entertaining footage so figured I'd upload.
Pro Shifter Lap around Homestead for SKUSA Winter Series
Переглядів 1,2 тис.4 роки тому
Take a lap on board the IAME 175 SSE and the American-Made IKart chassis during Sunday’s Pro Shifter Main Event for around #4 of the SKUSA Winter Series.
BILLY MUSGRAVE, Santa Maria PKC 2019 Pro Shifter Race
Переглядів 7 тис.4 роки тому
Ride on board Billy Musgrave's Croc Promotion USA /MRC / IAME 175 Shifter Kart as he drives from the back (twice) to win his 11th straight Pro Shifter Main Event.
LAKC Pro Shifter Main Event, July 2019 - Last to 1st
Переглядів 16 тис.5 років тому
Boom! Ride on board my factory Croc Promotion / MRC IAME 175cc Shifter Kart for the LAKC Pro Shifter class as we come from dead last and pass almost 20 karts to take the lead in just 7 minutes. Huge thank you to MRC, Croc Promotion USA, Mad Old Nut Racing, Pole Position Raceway, P2R, Liquid Sky Sports, 6D Helmets, LAKC, CalSpeed, and everyone else who supports us and helps make this happen!
Billy Musgrave CalSpeed Nuovo - Track Record
Переглядів 1,3 тис.5 років тому
Here we go! Ride on board my factory Croc Promotion / IAME 175cc Shifter Kart as we set track record (46.844) on CalSpeed's Nuovo layout during LAKC Qualifying (7/21/2019). Huge thank you to MRC, Croc Promotion USA, Mad Old Nut Racing, Pole Position Raceway, P2R, Liquid Sky Sports, 6D Helmets, LAKC, CalSpeed, and everyone else who supports us and helps make this happen! Looking forward to setti...
Billy Musgrave Calspeed Grande CCW - Track Record
Переглядів 2,3 тис.5 років тому
Ride on board my factory Croc Promotion / IAME 175cc Shifter Kart as we set track record (49.722) on CalSpeed's Grande CCW layout during LAKC Qualifying (6/30/2019). Huge thank you to MRC, Croc Promotion USA, Mad Old Nut Racing, Pole Position Raceway, P2R, Liquid Sky Sports, 6D Helmets, LAKC, CalSpeed, and everyone else who supports us and helps make this happen! Looking forward to setting a fe...
LAKC Pro Show - Shifter Main Event (8/13/2016)
Переглядів 6 тис.7 років тому
LAKC Pro Show Main Event for S1/S2/Open 125 Shifter. Raw audio and video footage edited together for those who's eyes & ears love the sounds of grabbing gears!!
MRC CR125 FUEL PUMP SYSTEM
Переглядів 8 тис.9 років тому
A very quick video showing how our MRC Fuel Pump System is mounted and how the fuel lines are routed. We use a Dellorto Fuel Pump, high quality Motion Pro 1/4" Fuel Line, and a brass 'Y' fitting for the oil reservoir in the pulse line. This 'Y' is built to catch excess oil in the pulse line and prevent it from getting into the fuel pump. This 'Y' should be checked regularly and drained when it ...
Factory MRC 2014 Tony Kart 'Racer' EVK Shifter
Переглядів 12 тис.10 років тому
Musgrave Racing Company is proud to finally unveil the 2014 TonyKart 'Racer' EVK KZ chassis with Complete MRC Spec-Honda CR125 Engine Package. These karts are race-ready and SKUSA legal! Contact us for more details and information: willy.musgrave@yahoo.com (951)-314-4595 www.musgraveracing.com Song credit: Imagine Dragons - Radioactive (Synchronice Remix)
SK-1 Pipe Mount Installation
Переглядів 6 тис.10 років тому
A quick video showing how to properly install the new Pipe Mount for use with the SKUSA SK-1 Spec CR125 Pipe.
CalSpeed 'Grande CW' Practice, April 2014
Переглядів 10 тис.10 років тому
Some practice laps on CalSpeed's 'Grande Clockwise' configuration from the perspective of Billy Musgrave.
LAKC 3/16/14 S1/S2/OPEN MAIN, BILLY MUSGRAVE
Переглядів 8 тис.10 років тому
Round #2 of the LAKC 2014 series. This is the S1/S2/Open Shifter Main Event on board with Billy Musgrave. A flat tire in the heat race resulted in me starting from the very back for the main. An interesting and fun race for sure, but I'll let the video speak for itself...
I just found one on Facebook marketplace for 600 bucks
Most American tracks suck for shifter karts. Too short, too tight.
Where can i buy the crg sticker in the front
That was awesome. That was an awesome jump at the start, nice clean racing
Nice job, Billy😮
Job well done Billy 👏
Bro that was a awesome race 🤙
You absolutely killed em in the hard braking zones and getting into the corner. Looks like the KZ was smoother (and thus faster) off the tight corners. Everywhere else, the 175 power was on par with the KZ. Great drive. Congrats on the well-earned win.
Love the video. Been following for a long time. Hate you got the penalty. actually the slight jump looked like it hurt your start a bit.
🔥
This is the 10th time I watched this your an animal man beast mode x100
Bummer about the bottom end letting go. What engine are you running? 175 maybe? Not to make any hay about the failure, but you appear to have more throttle roll-on & torque off the corners than I do with my Honda 125.
Congrats, nice run, glad your getting the karts sorted, sorry about the engine issues. Just cant seem to catch a break.
Thank you, and this one was on me; I just had way too much time on the bottom end, was going to rebuild it after the race anyway haha
@@Factorykarts Yeah, I can remember that "just one more race" thinking. It bit me also, so I feel your pain.
Your ripping dude ,I wish you could drive a F1 car someday💪
Full on Motoring! 😎🤙
Impressive driving Billy. Your consistency is beyond impressive. This was on the iame screamer 3 correct?
9:59 how did that downshift not send his piston flying??!!
Great race! I drove this track years ago. I live in Phoenix now. Have you ever driven PKRA in Glendale, Arizona?
Thank you! And yep I've driven PKRA a ton over the years, it's a fun track, would like to race there again if they get some shifters together.
Nice drive, glad you are getting the new chassis sorted and your luck is getting better. All the DNF's sucked.
Thank you, the prototyping phase was rough haha, but the current model is almost perfect, just working on our engine program now, should be ready for Supernats this year.
Man you were hauling ass ! 😎
That kart it's overpowered....
How is this even possible at this level?? Massive respect in going for the gap. Obviously you have great skill but at that level i assume a lot of them do. Is it your kart set up?
I read the Hondas run best below 135° . I see you're running around 148. Is that the difference between the Motocross and the shifter?
What a beast
Wow! Great skills man.
Damn Wilbur!
Great race, dude. Thanks for tuning my CR125 kart today. Mad skills on and off the track.
I want to get into this buy have no idea where to start
So fast out of the box!!
First. Way to go Billy. Been waiting on some new vids to be uploaded.
Beautiful driving man. Nice !!!!
All you need is some sponsors and you'd be set for F3 racing. You have a good skill for it !
You're ready for F4 or F3 man!
Last time I raced at LAKC was back in 2009 I believe. Looks like they changed turns 1, 2, and 3? Just a bit more technical.
Wow amazing continue like that
Well , I wasn't expecting that plume of dust 🤣!
Billy, what engine are you racing with ?
My father raced here many times in the early 90s
Did that dude flip you off after presumably pushing you off track?? 😵
I see a pump around! single tho not double...wait you have a carb plate too...nice so it is a dub
Hey Billy you the man bro. Love your driving
Great driving
Those are the same graphics that were on my tony kart
Nice👌
Good job, that was some wicked driving. Did you use stabilization on the camera? very smooth video for being cart mounted.
How is the power on that engine, is it mostly on the bottom end? What the top speed at the end of the longest straight?
They rev them to the moon +15k rpm on built race engines. And they bog like you wouldn't believe when dropping out of the power band. Incredibly difficult shifters to drive.
The 175 makes power at 8000, but torque is at 12.5 and max hp is 13
@@shifterdriver6215 I have a Super Shifter, changing the Dellorto carburetor for a Tillotson was a terrible idea, thanks 🙏
@@p.c.h.6721 eh it depends, the dellorto is better for someone who is inexperienced or doesn’t want to be bothered with the carb. At first I didn’t like the sse because we couldn’t get it to start, but it drives extremely fast. Over time I’ve gotten used to tillotson and it’s all about keeping it rich, as if it’s too lean it resides to start at all
@@shifterdriver6215 Thanks, the European SSE comes with electric start, works very well, so no problems starting the engine. With The Tillotson, once in a while, I get to a track where for some inexplicable reason at one particular corner, the engine fails every single time I drive around that particular corner, I come out of that corner in second gear and as soon as I step on the throttle, the engine Boggs down, as if it doesn’t have enough fuel, then as soon as I manage to shift into third gear, the engine takes off, no problems after that, so the million dollar question is “why the engine bogs down in one particular corner of the track, lap after lap, but on every other corner, some of them even slower corners, there are no problems, you can throttle the engine while in second gear and the engines pushes like hell?” Something is affecting the Tillotson at that one particular corner and I don’t know what it is, it’s driven me crazyyyyy. I replaced the pressure spring from a 42gr to a 48gr and that improved the problem quite a bit, but there is still a slight hesitation coming out of that particular corner, it’s not responding 100% as it does on every other corner of the track.... I don’t think there’s a 50gr pressure spring? So I ended up buying the Dellorto carburetor (don’t get me wrong I like the Tillotson so I don’t have to deal with changing the main jet, but that problem at one particular corner makes me lose a lot of time when I use the Tillotson 😡😢)
The brakes on this kart are RIDICULOUS
Awesome!!!!! YOu RocK that Croc!!!!!!!! Please try to make the Quincy Gran Prix next year!!
nice job excellent pièce of driving
Coming from last was impressive... but doing it twice? 😂🏁
cody did an oopsie